Setting Up Sod Properly

By Kissy Taj


I was contemplating installing a new lawn making use of rolls of grass, and obtained to considering about all the terms used for the soil cover. You can almost use the terms, turf, sod, and lawn interchangeably, and most people would know what you mean. But since I like to be somewhat accurate in my choice of words, I explored the difference between these terms. What are the terms or manual in installing the sod the right way?

1. Sod dimensions - When starting your sod venture an individual must take into account all landscape structures and flower beds. Then, using a measuring wheel or tape measure, perfectly measure the area to be sodded. Include 5% to this number to allow for cutting around structures & beds. This number represents the square footage of sod you will need. If you are not sure most sod providers can aid you if you give them with an precisely marked drawing.

2. Soil Preparation - Preparing the base under your sod is vital! As the grass grows the roots must be able to sink into into the soil. Tough surfaces protect against the growth of grass. Make sure all stones, aged roots and grass are removed from the installation region. Topping this with three inches of topsoil creates a good base. This functions well as the sod strips appear with its own soil amendment.

3. Final grading - The base area must be leveled to insure sod will also be level. Using a appropriate grading rake will work best. For larger areas you may need to roll over the soil using sod roller. Rolling ensures that soil does not run or settle causing holes or gaps that will hinder sod growth. Sod preparation is everything when it comes to sod installation.

4. Purchasing sod - There are many sod vendors to select from (lawn and garden stores, sod growers and nurseries) but you should understand what you are seeking for. Sod strips should be dense and at least 2 inches long. Look for a consistent green color with a network of roots on the underside, with a damp soil base of at least 1". Sod strips should not tear or fall apart when handled. For large applications, we suggest sod shipping and delivery to reduce handling.

5. Laying sod - Place your own first row of sod starting in opposition to the edge of a flower bed, house, patio or any landscape border. The subsequent row should overlap at the seam. Do not line up your seams! Arrange seams to avoid lines when sod grows in. Use a sod cutter (you can purchase one at most lawn and garden stores) to cut together all borders and around landscape sprinkler heads. Keep all items on the side as you may require them to fill in as you do the job.

6. Watering - During the first two weeks you should water for 45 minutes. This hefty watering helps to push roots down into soil. Following this, you should water it 20 to 30 minutes a day, depending on heat conditions.

7. Maintenance - Every person desires to understand when it's good to do the first cut. Relying on the growth of the turf and if the roots started to grab it, it will determine when you can cu it. Analyze the area by lightly pulling back a part of sod. If the sod has rooted, you may do your first cut. Since your new lawn is in its infancy, it should be mowed at a gradual speed for the first month.




About the Author:



Aucun commentaire:

Enregistrer un commentaire