A Tree House

By George Dodson


If you are creative and if you dont find a place to work nowhere is better than a Treehouse. Treehouse are of many kinds such like as the variation with the trees and the building of a Treehouse based on some general thumb rules.

Step 1: Set up your beam You are suggested to hold up beams of two sets what would be 3/4 diameter x 10". You are recommended to set your beams at the same height of your Treehouse. At this time you have to set up a border beam at the top of beams and square them. Once you get that your frame is tetragon you have to think to fix your floor truss.

Step 2: Leveling the Platform With an improved thinking it can be said that nothing is healthier to echelon your platform with the prop up of floor leveling and to puffiness a long 2x4 on one corner and go to the next corner with the intention of leveling that beam and install another 2x4. From my view the longer the level it will be superior.

Step 3: Fix the braces of knee You are highly recommended to install the permanent braces only after the conformation of your platform being plane so that it could support your Treehouse. You would be easily workable with two 2x6's screws together and a cut of 45 degrees angle. It is better to lift some limit brackets to increase to the tree with another 3/4" lag.

Step 4: Go for deck When you have completed this stage a platform is ready to support you. So it is the key step I think. It is better to commence any one side for deck building. You should hang up the board with a long edging so that you can create an appropriate cut with a saw. It is convenient to use a pencil that is used by carpenters for maintaining a suitable gap between your deck.

Step 5: Install the wall after making a frame Your walls should try to be structured on the land. It is important to evaluate the wall considering the thickness of the side. In the mean time it is better to mount your siding on the ground. You have to be cognizant about the siding on the walls that it should contact the last part of the two walls.

Step 6: Roof framing At first you have to confirm about the degree of slope of your roof then go for it. You have to determine the height of rafter first. Then install a center roof beam to support the rafters temporarily.

Step 7: Doors and access ladder setting You are suggested to choose treated wood as your working material in case of ladder building as the ladder acts as a bridge between the soil and your house. For easy climbing it is better to keep a space of 10 inches between two steps.

Step 8: Railing establishment and enjoy it It is ideal to build a fence with a height of 36 inches where the columns used to support the railing should be 4 inches apart from each other. For maintaining proper space you should better to begin from the middle portion. Again, all the tops should be screwed first. After completion of screwing to the top you should move forward to middle and finally to the lower part.

You should capture safety measurement at the time of building Treehouse. You are recommended to use a safety belt all-time that is connected to a ladder or a strong branch of the tree. You should go wisely. Reserve any material that can be helpful for you instantly close to your hand. You should take the work as fun.




About the Author:



Aucun commentaire:

Enregistrer un commentaire