Spend Less In Cabinet Refinishing Project

By Kelli Townsend


It does not take many years before your area of storage can look a little worse for wear. What suited you years ago may no longer please you when their color changed. Unlike a time renovation job, cabinet refinishing in Kansas City makes a perfect alternative to enhance their home without spending a lot of time and money.

Refinishing method is used to renew the coat or the paint of a furniture in order to have a fresh look. There are different types of surfaces that can be refinished like wood, metal and plastic. In case of an old wood furniture, this process is being performed to maintain its beauty and value.

Refinishing is a great way to liven up your living space and increase the value of your home at the same time. There are things that you need to notice about the process before you begin. Asking information from a professional will greatly help you in doing the work to make sure that your storage will be so strong after the process so it can withstand another five to ten years.

Positive attitude in doing cabinet refinishing work can result in a remarkable make over. It is better to plan ahead for your project so that all materials and tools can be assembled before you get started. You probably have most of those in your tool box ready, but still have them checked first, in case you are lacking something.

Find a convenient area where you can place all your materials and for the work. Make sure that the storage is placed in a dry area to avoid the bottom or any part from getting wet that will cause decaying. Remove the doors and shelves using a screwdriver being careful not to damage them and have them labeled to remember where they go when returning them.

Sand all the sides and surfaces, not necessarily all the old finish for light sanding to smooth the rough areas so that the new finish will adhere properly. Do not tend to skip this process because without doing this, some unwanted roughness caused by scars and blemishes may show up when coat is applied. After sanding, use a damp cloth or a vacuum to clean and remove dust caused by the sanding process.

Start priming your cabinet with a single coat of prime or sealer. If you wish to paint different color other than white, tint the primer to match your top coat. You might be able to get by with just one finish coat in that way otherwise you will most likely need two coats of paint over the white prime. You can choose to paint only the faces of the cabinet or the interior as well.

Let the removed components the first to be primed since they are smaller pieces. Continue the process of priming on all areas and leave it overnight to allow it to dry completely. When it is already dry, sand lightly to smooth the areas. Clean the areas again to remove excess particles before the final coating takes place.

Cabinet refinishing in Kansas City possibly is the way to give the tired storage a new life. With this process you will surely be needing a lot of hard work, patience and creativity but once you are through, you will experience a dramatic transformation of your cabinet courtesy of your own hands. You will also be able to learn how to cut your time and cost and given peace of mind while producing an exceptional result.




About the Author:



Aucun commentaire:

Enregistrer un commentaire