The field of painting covers two areas of activity: coating, surface treatment, including the pretreatment of surfaces and applying toppings (wallpapering, wall, ceiling and floor coverings, film coatings, etc.). Home painting Bend OR involves the application of primer, paint and varnish layers for protection and redecoration. The scope refers to plaster, stone, wood, concrete, metal and plastic surfaces.
It extends to walls, ceilings, floors, windows, doors and furniture on finishes of components, equipment and machinery (protection from moisture, heat, rust, impact) to the color design. In addition to dealing with colorants and auxiliaries of all kinds. The most important work techniques include priming, wallpapering, clearing, smoothing, grinding, brushing, spraying, dipping and flooding. Work equipment include paint brushes, paint rollers and scrapers, injection units, devices and guns, paints and coatings, chemical solvents, among others.
The painters are often the last to work on a construction site, as one person or in teams depending on the amount of work to be performed. After refurbishment, the place becomes clean and habitable. This depends on the quality of workmanship. In a training center, apprentices can obtain the CAP and BP. The certificate of BP is available in two years after a CAP. It allows apprentices to quickly enter the workforce and deepen knowledge in decorative products such as patinas, glaze, faux wood, faux marble, etc.
The job description of painter and decorator is divided into two subject areas: design and maintenance (painter and decorator) and structural and corrosion protection. The disciplines have the same training content according to the regulations during the first two years. Differentiation takes place during the third year of training. There is also a two-year training program for buildings culminating in a qualification test, which is identical to the intermediate examination of regular painters and finishers.
It is also necessary to have a container in which the paint is put, and a spinning grid for draining the roller. The sandpaper is used to polish the surfaces of various materials such as wood, metal. There are different grains: 40, 80, 150, 240, 600. They should be used depending on substrate to sand.
The apprenticeship lasts three years, apprentices undergo weekly theoretical courses in a vocational training center, theoretical courses are organized and established by the state. Training is supplemented by practical preparation in a vocational school, between 24 and 40 days depending on the canton, distributed in three years, these courses last about two weeks per year of practice, they are organized and set up by professional associations.
However, a financing option is available through student aid. The costs for the mostly state schools are moderate. Private schools are more expensive but they are also the oldest. Studying at a preparatory school is not compulsory but is recommended because the test involves four fields. Regional painters and finishers are also trained with the additional test as a painter and decorator.
Vocational schools for the teaching of coating technicians can be found in every country. There is also the technical school for coating and design. Practical skills of professional painters are taught at these schools (private or training workshops). Operational Course (formerly known as introductory course): supporting practical knowledge and skills in addition to teaching. Based on a model training course. Vocational school: teaching the relevant theoretical basis for vocational training. In addition to this evidence and solutions of everyday problems and personal training in general education.
It extends to walls, ceilings, floors, windows, doors and furniture on finishes of components, equipment and machinery (protection from moisture, heat, rust, impact) to the color design. In addition to dealing with colorants and auxiliaries of all kinds. The most important work techniques include priming, wallpapering, clearing, smoothing, grinding, brushing, spraying, dipping and flooding. Work equipment include paint brushes, paint rollers and scrapers, injection units, devices and guns, paints and coatings, chemical solvents, among others.
The painters are often the last to work on a construction site, as one person or in teams depending on the amount of work to be performed. After refurbishment, the place becomes clean and habitable. This depends on the quality of workmanship. In a training center, apprentices can obtain the CAP and BP. The certificate of BP is available in two years after a CAP. It allows apprentices to quickly enter the workforce and deepen knowledge in decorative products such as patinas, glaze, faux wood, faux marble, etc.
The job description of painter and decorator is divided into two subject areas: design and maintenance (painter and decorator) and structural and corrosion protection. The disciplines have the same training content according to the regulations during the first two years. Differentiation takes place during the third year of training. There is also a two-year training program for buildings culminating in a qualification test, which is identical to the intermediate examination of regular painters and finishers.
It is also necessary to have a container in which the paint is put, and a spinning grid for draining the roller. The sandpaper is used to polish the surfaces of various materials such as wood, metal. There are different grains: 40, 80, 150, 240, 600. They should be used depending on substrate to sand.
The apprenticeship lasts three years, apprentices undergo weekly theoretical courses in a vocational training center, theoretical courses are organized and established by the state. Training is supplemented by practical preparation in a vocational school, between 24 and 40 days depending on the canton, distributed in three years, these courses last about two weeks per year of practice, they are organized and set up by professional associations.
However, a financing option is available through student aid. The costs for the mostly state schools are moderate. Private schools are more expensive but they are also the oldest. Studying at a preparatory school is not compulsory but is recommended because the test involves four fields. Regional painters and finishers are also trained with the additional test as a painter and decorator.
Vocational schools for the teaching of coating technicians can be found in every country. There is also the technical school for coating and design. Practical skills of professional painters are taught at these schools (private or training workshops). Operational Course (formerly known as introductory course): supporting practical knowledge and skills in addition to teaching. Based on a model training course. Vocational school: teaching the relevant theoretical basis for vocational training. In addition to this evidence and solutions of everyday problems and personal training in general education.
About the Author:
You can visit www.cascadepaintinganddesign.com for more helpful information about Basic Guide To Home Painting Bend OR.
Aucun commentaire:
Enregistrer un commentaire